所有的產物在成型后都必要對它們停止一些有用的處置，起首咱們必要對其外表層停止處置，只要外表層處置適合才能使它的壽命延伸，而且提高機能。

All products must undergo some useful treatment after molding. Firstly, we need to stop treating their outer layer, as long as the treatment is appropriate, in order to extend their lifespan and improve their functionality.

噴涂與電鍍處置是機箱機柜外面處置.常使用的方法，它的感化是防銹、防靜電，同時還可以構成一層保護膜。當并非機箱機柜所有格的外面都要做噴涂和電鍍處置。一樣平常優良機箱機柜外部較少做漆化。

Spraying and electroplating treatment are external treatments for chassis and cabinets The commonly used method has the effects of rust prevention, anti-static, and can also form a protective film. When the outside of the chassis cabinet is not the only compartment, it needs to be treated with spraying and electroplating. Normally, there is less paint applied to the exterior of high-quality computer cases and cabinets.

不僅僅是機箱機柜外面處置，良好的散熱性對付機箱機柜來講也是異常重要的。但是機箱機柜的散熱離不開電扇，經由過程你放入裝備發熱量的巨細來斟酌電扇的設置裝備擺設。平日來講，機箱機柜頂部都有兩到四個電扇,側壁電扇應安裝在機箱機柜后壁，為何要這樣做呢，其緣故原由是裝備后部會發生大批熱量為了實時把熱量排擠以是要再側壁電扇安裝在機箱機柜后壁。

Not only is it important to dispose of the outside of the chassis and cabinet, but also to have good heat dissipation for the chassis and cabinet. However, the heat dissipation of the chassis and cabinet cannot be separated from the electric fan. Through the process, you need to carefully consider the size of the equipment's heat generation to determine the setting and layout of the electric fan. On weekdays, there are two to four electric fans on the top of the chassis and cabinet. The side wall electric fans should be installed on the back wall of the chassis and cabinet. The reason for this is that a large amount of heat is generated at the rear of the equipment. In order to dissipate the heat in real time, the side wall electric fans need to be installed on the back wall of the chassis and cabinet.

外表層處置和散熱性處置對付機箱機柜來講都是分外重要的，這兩樣做好了對配電箱來講機能會更強

The treatment of the outer layer and heat dissipation is particularly important for the chassis and cabinets. If these two are done well, the functionality of the distribution box will be stronger